Posted on Leave a comment

Patriotic Stars Table Runner Problems and Fix

In my last post, “Patriotic Stars Release!” I mentioned that the heavy quilting in the center of my sample created some problems.  I thought it would be good if I explained what happened, and then tell you how I fixed it.  Unfortunately, I did not take photos, as I was going through a whole big argument with myself at the same time as chewing myself out for getting in a hurry and “you should have known better.”  Anyone else ever done that?  I am hoping by writing this post, I can either keep someone from doing what I did to begin with, or give hope that it can be fixed if someone is experiencing what I did.

So here is the story…

I pieced my table runner all together:  the three pieces that make up the center, the silver/white border, and the red border.  I then placed the stars from the “Patriotic Stars Scatterings Kit” on the center panel, and fused them down when I was happy with the layout.  I sandwiched it with two layers of cotton batting (so it could be used on the table to protect from hot dishes), and the blue fabric on the back.  So far, so good!

Then I sat down at my vintage Singer 201-2 (which I love dearly, and keep set up for free motion machine quilting at all times!) and quilted the center panel.  I was really happy with how it turned out, other than the fact that I had wanted to use silver metallic thread, but it kept shredding, so I switched to light gray rayon embroidery thread.  It sewed great, and looked good, although without the twinkle.

I then switched to my “modern” computerized machine with the walking foot on, and stitched in the ditch around the silver/white border, and added three rows of straight stitch to the red border.  I wanted to keep the borders simple, so that they did not take the eye away from the center panel.

I then made the binding, and started pinning it on, and realized that I had big problems. To be honest, I had noticed the problems earlier in the process, but I had hoped the straight stitching would pull it in and fix it.  (This was when the “you should have known better” argument with myself started.) The outside borders ruffled really badly.  The heavy quilting in the center had really pulled that center panel in, and the borders were just too long.  I tried to tell myself that it wasn’t that bad, but it really was, and I knew I would never be happy with it that way.  Not to mention that this table runner was the sample for the “Patriotic Stars” kit, and I wanted to photograph it and show it to quilt shop owners as a visual for the kit.    But the 4th of July was getting closer and closer…  Oh, well.  I don’t like shoddy workmanship and this was definitely that!

So…  I spent the time (yikes!) and ripped out the straight stitch quilting on both the red and the silver/white border.  Then, I ripped out the seams holding those eight pieces to the center panel, being careful not to mess the batting or the backing up.  I then pressed the pieces with sizing to see if the marks from the threads would come out, and they did.  I was prepared to have to cut new pieces, so that was good.

Then I measured the center panel as it laid flat.  I was quite relieved at this point to find that it really laid down as a rectangle.  Thank the Lord, the top and bottom were the same length as were the two ends!  Yay!  I wold like to emphasize that I did not measure the fabric of the panel, but how the panel laid.  The fabric was still the same length as it had been before I quilted it, but the quilting had pulled it in, so it no longer LAID at that length.  That meant that the borders were going to be smaller than the actual fabric in the quilted center panel.

I shortened the silver/white pieces to measure the same as what the center panel laid, and stitched them onto the panel, pinning closely together and easing the quilted center panel to match the border.  They were a bit over an inch too long!   No wonder I had ruffles!

I repeated the process with the end silver/white pieces, and then the long red pieces, and the end red pieces.  Now it laid flat!  Another YAY!

Adding Borders

I pinned the border pieces down really well, keeping my pins fairly close together (2 to 3 inches apart), and redid the straight stitch quilting in the ditch on the silver/white and the lines on the red.  And it laid flat again!  (Insert HUGE sigh of relief.)  I bound it, and now I don’t have to be embarrassed by it anymore!

So what did I learn?   First of all, if I am going to do heavy quilting like that, I need to match sashing or borders to the finished blocks after the quilting is completed.  Also, I need to slow down and take the time to fix things if they need fixed.  A couple of hours of time is a worthwhile investment in something you will be proud to use for years.  Not to mention, that it is a great kit, and we still have Labor Day and Veteran’s Day coming up this year!

Please, please, please!   Learn from MY mistake and avoid making one yourself!

Posted on Leave a comment

Patriotic Stars Release!

I am so happy to inform you that a new kit, “Patriotic Stars” Scatterings, is being released today.  This is a simple kit, but I have had so much fun playing with it and thinking of all the possibilities!  I LOVE this table runner!  It was so much fun to make, and I have quite a few stars left over!  I know it is a bit late for the Fourth of July, but we still have Labor Day and Veteran’s Day ahead of us this year.  And there are many possibilities for Quilts of Valor as well.  I love the sparkle of the Michael Miller Fairy Frost… white with silver glitter.   This same fabric is featured in the “Snowflakes” and “Let It Snow” kits.  I wish photos could do it justice, but I haven’t figured out how!  The featured photo for this particular article was taken outside in the sun.  A passer-by actually commented on how much she loved the sparkle, but alas.   The sparkle once again eludes the camera.  Sorry, but you will just have to take my word for it, unless you have seen the other kits.

I also made a 10” square that I will turn into a hot pad, so that I could practice the free motion quilting that I was envisioning.  As you can see, I did change the quilting a bit when I moved over to the table runner.  I started out thinking fireworks, and ended up moving more toward celebration.

IMG_1833

For both the table runner and the hot pad, I used two layers of cotton batting, so that they would be more usable as items to protect my table from heat.  But then I also used rayon embroidery thread to quilt them, so that it would be shiny too.  I don’t know how that is going to work with hot things.  Oh, well.  Time will tell.

Another thing I didn’t think through as well as I should have, was the amount of “shrinkage” I had from heavily quilting the center panel of the table runner through two layers of batting.  That probably would not have been an issue if I was heavily quilting the outside sashes, but that was not what I planned to do.  So I had to do some “unsewing” and some re-calculating (Quilters started doing that WAY before GPS was invented!) and I got it fixed.  I may do a whole ‘nuther blog on that process.  I DID take photos just in case.

Whether you buy a kit or not, I hope this inspires you to be creative today!

And while I don’t agree with all of Mr. Reagan’s politics, I do agree with this quote from him!

Blog Quote 4 July

Posted on Leave a comment

Welcome Spring!

Artfully Quilted Design LLC "Brown Bunny" Fusible Laser Cut Applique

This year, I am so happy to put winter behind us, and move forward to spring!  It seems like most of my family and many of my friends have had bugs of one kind or another off and on all winter, including myself.   But spring is here, and I welcome it with open arms!

To me, spring means change…  The sun comes out from behind the clouds more often.  The grass turns from brown to green.   The bare branches of the trees start to show color, greens and pinks and yellows and whites.  The snowblower gets put away and the rakes and shovels come out.

And then there is new life!   We have a farm close to us that raise sheep, and I am waiting for the sight of the dozens of newborn lambs that will soon be in their pasture.  The birds are nesting and getting ready to lay their eggs.  Soon the chipmunks will be out of their winter holes and on my front porch to taunt my dog.  🙂

Another new thing?   Two new kits to honor spring!!!

The first is the “Brown Bunny”, pictured at the beginning of this article.  This beautiful bunny is 12 ½ high X 12 wide and is a simple kit to put together.  This would make a lovely medallion center for a baby quilt and would look great on a door hanging, wall hanging, or table runner.

The second new kit is “Watercolor Flowers” Scatterings.  This kit contains fusible laser cut flowers, four each of 2”, 1¾”, and 1¼”, plus sixteen 1” and twelve 1¾” leaves.  These work great in little arrangements on the border of a quilt, in the corner blocks, or scattered on top of a quilt, wall hanging or table runner.  They could even be used on child’s clothing.

Artfully Quilted Design LLC "Watercolor Flowers" Scatterings

I hope this has inspired you to bring some spring into your home!

Happy sewing!

Posted on Leave a comment

Video Tutorials are Now on the Website!

A video tutorial for the entire process of assembling the Bluebird of Hope kit and the Scarlet Cardinal kit are now available on the website!  At this point each of these tutorials is located in the Store on the appropriate product page.  Just click the “Video Tutorial” tab on the left side of the screen and the video will come up.

These two videos are each about 45 minutes long.  Please feel free to fast forward!  🙂  I did want to do a couple of videos that showed the entire process, with a lot of explanation (and some less than professional moments), so that you could see how easy these kits are to assemble.

I apologize for the amateurness of these, but you have to start somewhere, right?  What a learning process this all has been for me!